In this guide, you have a step-by-step walkthrough you can take when installing an eSIM on your Hammer Device.

 

Installing an eSIM using a QR Code

Before attempting to install the eSIM, there are three main things you will need:

  • A strong internet connection - Ideally you will need to be connected to Wi-Fi or have a good internet connection.
  • An eSIM compatible device - If you are unsure whether your device is compatible with eSIMs, please check the following article: List of compatible devices
  • The device is network unlocked - If you are unsure whether or not your device is locked to a certain network, please check the following article: Locked/unlocked devices

Do not forget to turn on Data Roaming once the installation is complete.

1. On the Home Screen of your device, tap on the app named eSIM.

Screenshot_20230310-141256.png
2. Once in the eSIM app, tap the orange circle.
Screenshot_20230310-141303.png
3. Tap on the Scan QR code option.
Screenshot_20230310-141316.png
4. Scan QR code provided.
Screenshot_20230310-142950.png
5. Accept the prompt given and tap INSTALL.
Note: Do NOT close this window else the installation will stop.
Screenshot_20230310-141437.png
6. Please allow up to 10 minutes for the eSIM to activate.
Screenshot_20230310-141443.png
7. Once your eSIM has finished installing, tap OK.
Screenshot_20230310-141456.png
8. The eSIM will say the status: DISABLED.
Screenshot_20230310-141506.png
9. Make sure to enable your eSIM by tapping the power button and tap ok.
Screenshot_20230310-131533.png
10. Please make sure your Data Roaming is toggled On.
Screenshot_20230310-134818.png
11. The Data Roaming toggle should appear as below on the installed eSIM.
Screenshot_20230310-134829.png
12. The eSIM is now installed and set up.